|
Question |
Rating |
View Answer |
|
You are using Exchange Management Console to move selected mailboxes to another database. You select the mailboxes and step through the pages of the wizard. On the Move Schedule page, you specify that the mailboxes should be moved at 11:30 PM that day, and you click Next. On the Move Mailbox page, you click Move. What then happens? A. You click Finish, and a single command to move the mailboxes is sent to Exchange Management Shell. Exchange Management Shell uses the scheduling facilities of the OS to delay the execution of the command until the appropriate time. B. You click Finish, and multiple commands to move each mailbox individually are sent to Exchange Management Shell. Exchange Management Shell uses the scheduling facilities of the OS to delay the execution of the commands until the appropriate time. C. The Finish control is grayed out, and you cannot close the Move Mailbox Wizard. At 11:30 PM, a single command is sent to Exchange Management Shell to implement all the mailbox moves. After the mailboxes have been moved, you can click Finish to close the wizard. D. The Finish control is grayed out, and you cannot close the Move Mailbox Wizard. At 11:30 PM, multiple commands are sent to Exchange Management Shell, each of which implements a mailbox move. After the mailboxes have been moved, you can click Finish to close the wizard.
|
|
View Answer |
|
Your companys Active Directory environment becomes corrupted on the morning of Thursday, March 17. The Active Directory team restores all of the directory objects and settings from a backup that was taken on Monday, March 14. Users who were assigned mailboxes between Monday, March 14 and Thursday, March 17, now report that they cannot access their mailboxes. You need to restore mailbox access for these users. What should you do? A. Run the Enable-Mailbox cmdlet from the Exchange server. B. Run the Connect-Mailbox cmdlet from the Exchange server. C. Restore the latest mailbox database backup. D. Restore the latest System State backup.
|
|
View Answer |
|
Jachamji has two users in different departments who need to communicate securely. These users need their communications on the LAN to each other to be both mutually authenticated and encrypted. However, they both need to communicate in the clear with other users on the LAN. How should Jachamji proceed?
A. Use VPN features to create a PPTP tunnel between the users computers. B. Secure the shared resources on both users' computers with local groups and restrict access to the shared resources to the two users. C. Put the two users on an isolated subnet. Enable packet filtering at the switch. D. Define and implement an IPSec policy for both users computers.
|
|
View Answer |
|
You increase the anti-spam restrictions for your Exchange Server 2007 organization. You inform your company s partners that they should forward any e-mail messages that are being blocked by the content filters to [email protected]. The forwarded messages will be reviewed so that modifications can be made to Safe Senders Lists to prevent the blocking problem in the future. External users are forwarding e-mail messages to [email protected], but you discover that no messages from external users are in the anti-spam mailbox. You need to allow the anti-spam mailbox to receive e-mail messages that are classified as spam. Which cmdlet should you run? A. Set- RecipientFilterConfig - RecipientValidationEnabled $false B. Set- ContentFilterConfig - BypassedRecipients [email protected] C. Set- ContentFilterConfig - BypassedSenders [email protected] D. Set- RecipientFilterConfig - BlockListEnabled $falsE. BlockedRecipients [email protected]
|
|
View Answer |
|
You need to configure Outlook Web Access to allow Microsoft Office documents to be opened but not saved on public computers. What should you do? A. Enable direct file access for public computers. B. Enable Force WebReady Document Viewing when a converter is available for public computers. C. Add the Office file formats to the supported document types for WebReady Document Viewing. D. Add the Office file formats to the direct file access Block list.
|
|
View Answer |
|
Your company s Active Directory forest consists of a single site that has a root domain and one child domain. You need to prepare Active Directory and the domains prior to installing the first Exchange Server 2007 computer. Which two commands should you run? (Each correct answer presents part of the solution. Choose two.) A. Setup /ForestPrep B. Setup /PrepareAD C. Setup /DomainPrep D. Setup /PrepareAllDomains
|
|
View Answer |
|
A new virus is discovered in your Exchange Server 2007 organization. The file extension is .ext for this virus. The current settings for attachment filtering are configured to delete specified attachments and allow the message to be delivered. However the virus files are not being filtered. You must stop the spread of this new virus. Neither the attachment nor the e-mail message should reach the e-mail recipient. The message that contains the virus should not generate a non-delivery report (NDR). You need to add a filter for the file extension of the virus. Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.) A. Add- AttachmentFilterEntry -Name *.ext -type ContentType B. Add- AttachmentFilterEntry -Name *.ext -type FileName C. Set- AttachmentFilterListConfig -Action Reject - RejectMessage “None” D. Set- AttachmentFilterListConfig -Action SilentDelete
|
|
View Answer |
|
You install an Exchange Server 2007 Edge Transport server role and Hub Transport server role. The server that has the Hub Transport server role is located in an Active Directory site named Chicago. You need to synchronize your companys Active Directory information to the server that has the Edge Transport server role. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Run the New- EdgeSubscription - FileName “c:EdgeserverSubscription.xml “ cmdlet on the server that has the Edge Transport server role. B. Run the New-EdgeSubscription -FileName “c:EdgeServerSubscription.xml” ?site “Chicago” cmdlet on the server that has the Hub Transport server role. C. Run the ADAMSync command on the server that has the Edge Transport server role. D. Run the ExportEdgeConfig -CloneConfigData “C:CloneConfigData.xml” command on the server that has the Edge Transport server role. E. Run the ImportEdgeConfig - CloneConfigData “ C:CloneConfigData.xml “ command on the
|
|
View Answer |
|
ActiveSync is a data synchronization program developed by Microsoft for use with its Microsoft Windows line of operating systems. Originally released under the name "Handheld PC Explorer" in 1996, it provides users of Microsoft Windows a way to transport documents, calendars, contact lists and email between their desktop computer and a mobile device, such as a Handheld PC, mobile phone, or any other portable devices that support the ActiveSync protocol. Company’s MS ActiveSync policy requires inactive users to provide their password each 15 minutes. Mr. Moore is the CEO of Company Ltd., his mobile device should be exempted from the inactivity timer. Now you have to exempt Moore'S mobile device from the timeout policy while maintaining the other corporate policy settings. What should you do? A. Remove the corporate ActiveSync policy from Mr. Moore's mailbox. B. Create a new ActiveSync policy that has the required settings, and apply it to the executives mailbox. C. Reset Mr. Moore's mobile device and refuse the corporate ActiveSync policy. D. Change the password setting on Mr. Moore's mobile device to take precedence of the ActiveSync policy.
|
|
View Answer |
|
You are preparing to configure e-mail retention on three managed custom folders for all mailboxes on an Exchange Server 2007 computer named Exch1. You perform the following actions. Create three managed custom folders. Create managed content settings for each folder, and configure the required retention settings. Create a new managed folder mailbox policy named MailRet. Add each managed custom folder to the MailRet policy. Configure the managed folder assistant for Exch1. You need to finish configuring the messaging records management (MRM) retention settings so that the three folders are available for the mailboxes on Exch1. What should you do? A. For each mailbox on Exch1, select the Enable retention hold for items in this mailbox check box. B. For each mailbox on Exch1, add the MailRet policy. C. Add managed content settings to the three managed custom folders. D. Create a new managed folder mailbox policy for each of the three managed custom folders.
|
|
View Answer |
|
You need to configure the conference room resource mailboxes in your Exchange Server 2007 organization to remove attached files from meeting requests. Which cmdlet should you run? A. Get-Mailbox - RecipientTypeDetails RoomMailbox; Set-MailboxCalendarSettings – DeleteAttachments : $true B. Get-Mailbox - RecipientTypeDetails RoomMailbox I Set- MailboxCalendarSettings – DeleteAttachments: $true C. Get-Mailbox - RecipientTypeDetails RoomMailbox I Set- MailboxCalendarSettings – DeleteNonCalendarltems: $true D. Get-Mailbox - RecipientTypeDetails RoomMailbox; Set-MailboxCalendarSettings – DeleteNonCalendarltems : $true
|
|
View Answer |
|
Question: 38 You need to find out the total size of a users mailbox. What should you do? A. Run the Database Troubleshooter in the Exchange Troubleshooting Assistant. B. Run the Get-MailboxDatabase cmdlet. .C. Run the Get-MailboxStatistics cmdlet D. Run the Get-Mailbox cmdlet.
|
|
View Answer |
|
Your company normally does not allow out-of-office messages to be sent to users outside of your Exchange 2007 organization. The company makes an exception for a business partner named Northwind Traders. The SMTP domain for Northwind Traders is northwindtraders.com. You need to configure your Exchange organization to allow out-of-office messages to be sent to e-mail addresses in the northwindtraders.com domain. What should you do? A. Add northwindtraders.com as a remote domain and set the appropriate options. B. Add northwindtraders.com as an accepted domain and set the appropriate options. C. Create a transport rule and set the appropriate options. D. Create a Send connector for northwindtraders.com and set the appropriate options.
|
|
View Answer |
|
Your native Exchange Server 2007 environment has the following server roles installed: Three Mailbox servers One Hub Transport server named ExchHub1 One Edge Transport server named ExchEdge1 The human resources (HR) department uses a Windows SMTP relay with an IP address of 192.168.10.25. E-mail from the HR department to all employees must be sent from this relay. You need to configure your Exchange environment to accept e-mail messages from the internal HR SMTP relay. Which cmdlet should you run? A. New- ReceiveConnector -Name ‘HR e-mail’ -Server ExchHub1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Internal B. New- ReceiveConnector -Name ‘HR e-mail’ -Server ExchHub1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Partner C. New- ReceiveConnector -Name ‘HR e-mail’ -Server ExchEdge1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Partner D. New- ReceiveConnector -Name ‘HR e-mail’ -Server ExchEdge1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage External
|
|
View Answer |
|
A users e-mail account is configured to use POP3. The users mailbox is accidentally purged from the Exchange Server 2007 Mailbox server. You restore a backup copy of the database that contained the mailbox to a recovery storage group on the same server. The user reports that he can not access his mailbox. You need to ensure that the user can access his mailbox. Before you reconnect the mailbox, what should you do? A. Enable POP3 access on the mailbox. B. Move the mailbox to a standard storage group. C. Instruct the user to use IMAP to connect to the mailbox. D. Instruct the user to use Outlook Web Access to connect to the mailbox.
|
|
View Answer |
|
You have forgotten a "share name". You need to locate a file in that share. How can you quickly see a list of all shares on your system?
A. Browse to your system through Network Neighborhood and you will see all of the shares. B. Using the computer management tool in the Administrative tools group in Control Panel, you will find a tab to view shared folders under system tools. C. Using the computer management tool in the Administrative tools group in Control Panel, you will find a tab to view shared folders under Storage D. Using Windows Explorer, choose shared folders from the view menu.
|
|
View Answer |
|
Your native Exchange Server 2007 organization has a single Edge Transport server named Exch Edge1. Exch Edge1 has an Edge Subscription established with a Hub Transport server named Exch Hub1. The network connection from Exch Edge1 to the Internet is interrupted for an extended period of time. After the network connection is restored, no messages are being delivered. You need to restore message flow immediately. What should you do? A. On ExchHub1, run the Resume-Queue cmdlet. B. On ExchHub1, run the Retry-Queue cmdlet. C. On ExchEdge1, run the Resume-Queue cmdlet. D. On ExchEdge1, run the Retry-Queue cmdlet.
|
|
View Answer |
|
You need to allow the owner of each distribution group in your Exchange Server 2007 organization to modify membership for the group. You must not allow the owner to make any other changes. What should you do? A. On the Managed By tab of each distribution group, add the owner, and select the Manager can update membership list check box. B. Modify each distribution group by assigning the Send As permission to the owners user account C. Modify each distribution group by assigning the Write permission to the owners user account. D. Add the user accounts of the distribution group owners to the Exchange Recipient Administrator role.
|
|
View Answer |
|
You create a new message classification named Customer Data. Messages that have this classification should not be sent outside the company. You need to redirect to the CustData mailbox all outbound e-mail messages that have the Customer Data classification. What should you do? A. Run the Set-MessageClassification -Identity ‘Customer Data’ -UserDisplayEnabled:$true cmdlet. B. Add read permissions to the Customer Data message classification by running the Set- MessageClassification cmdlet. C. Run the Set-MessageClassification -Identity ‘Customer Data’ RetainClassificationEnabled:$true cmdlet. D. Create a new transport rule to redirect to the CustData mailbox all messages that are sent from internal users to only users outside the company and that are marked with the Customer Data classification.
|
|
View Answer |
|
You need to find out if users can log on to your Mailbox server directly by using Microsoft Office Outlook. Which cmdlet should you run on the client network? A. Test- ServiceHealth B. Test- SystemHealth C. Test- MAPIConnectivity D. Test- OutlookWebServices
|
|
View Answer |