|
Question |
Rating |
View Answer |
|
You move a conference room mailbox named ConfRm 1 from an Exchange Server 2003 computer to an Exchange Server 2007 computer. You need to convert the ConfRm 1 mailbox to an Exchange 2007 resource mailbox. You need to ensure that the mailbox can be scheduled as a resource. Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.) A. Set-Mailbox-Identity” Conf Rm1 “-Type Room B. Set-Mailbox-Identity” Conf Rm1 “-Type Regular C. Set- MailboxCalendarSettings -Identity” Conf Rm1 “- AutomateProcessing AutoAccept D. Set- MailboxCalendarSettings -Identity” Conf Rm1 “- AutomateProcessing Auto Update
|
|
View Answer |
|
A former employee is sending e-mails to people in your organization attempting to recruit them to a new start-up company that he has created. E-mails are transmitted from an Internet service provider's SMTP server that is also used by several of your organization's clients. Management has asked you to block all e-mails sent from the new company's e-mail domain. Which of the following technologies should you implement? A. Attachment filtering B. Connection filtering C. Sender filtering D. Recipient filtering
|
|
View Answer |
|
Your company maintains a hot standby server named ExchDR1. An Exchange Server 2007 computer named Exch1 fails. You perform the following actions. 1. On Exch1, take the Exch1.edb database offline. 2. On ExchDR1, create a new storage group named ExchDR and a database named ExchDR1.edb. 3. Copy the Exch1.edb database from Exch1 to ExchDR1. 4. On ExchDR1, rename the copied database from Exch1.edb to ExchDR1.edb. Your attempt to mount the database is unsuccessful You need to ensure that the copied database mounts on the new server. What should you do? A. Rename ExchDR1 to Exch1. B. Rename the database on ExchDR1 to Exch1 .edb. C. Set the This database can be overwritten by restore attribute on the database properties. D. Run the Move-Mailbox -ConfigurationOnly -TargetDatabase ExchDR1.edb cmdlet.
|
|
View Answer |
|
You are an Exchange administrator at Contoso, Ltd. A group of consultants from Trey Research works closely with Contoso, and members of the group have mailenabled accounts in Contoso's Active Directory domain. The group membership changes frequently, and you create and remove mail-enabled Trey Research users on a regular basis. You want to ensure that group e-mails sent to the Trey Research Consultants group go to all consultants who currently have mailenabled accounts at Contoso. You also want to ensure that these e-mails are not sent to consultants who no longer have user accounts at Contoso because this results in nondelivery returns. How best can you achieve this? A. Create a mail-enabled universal security group B. Create a dynamic distribution group C. Create a universal distribution group D. Create a universal security group but disable its mailbox
|
|
View Answer |
|
You are writing a PowerShell script that takes the identity of a mailbox as a parameter, moves the mailbox to the database First Glasgow Mailbox Database in the storage group First Storage Group, and removes the mailbox from its original location. What should be the contents of the PowerShell script file? A. Param( [string] $Identity ) Move-Mailbox -Identity $IdentityDTargetDatabase OFirst Storage GroupFirst Glasgow Mailbox DatabaseO -SourceMailboxCleanupOptions DeleteSourceMailbox B. Move-Mailbox -Identity $Identity DTargetDatabase OFirst Storage Group First Glasgow Mailbox DatabaseO -SourceMailboxCleanupOptions DeleteSourceMailbox Param( [string] $Identity ) C. Move-Mailbox -Identity $Identity DTargetDatabase OFirst Storage Group First Glasgow Mailbox DatabaseO -SourceMailboxCleanupOptions DeleteSourceMailbox D. Param( [string] $Identity ) Move-Mailbox -Identity $Identity DTargetDatabase OFirst Storage Group First Glasgow Mailbox DatabaseO
|
|
View Answer |
|
You have an automatically generated CSV file with a list of your companys newly hired employees. The CSV file contains all of the information that is required to create the mailboxes for the new employees. You need to create new user accounts and mailboxes directly from the CSV file. What should you do? A. Redirect the output of the Import-CSV cmdlet to the New-Mailbox cmdlet with the appropriate parameters. B. Redirect the output of the Export-CSV cmdlet to the New-Mailbox cmdlet with the appropriate parameters. C. Redirect the output of the Import-Alias cmdlet to the New-Mailbox cmdlet with the appropriate parameters. D. Redirect the output of the Import-CSV cmdlet to the Enable-Mailbox cmdlet with the appropriate parameters.
|
|
View Answer |
|
Your company merges with Contoso, Ltd. Each companys mixed e-mail system includes Exchange Server 2003 servers and Exchange Server 2007 servers and Outlook 2003 clients and Outlook 2007 clients. Currently your company has a single remote SMTP domain for *, which is configured with the Allow none option. You need to configure the delivery of out-of-office (OOF) messages to the contoso.com domain, and you must ensure that no users outside of the two merged companies can receive OOF messages. What should you do? A. On the remote domain *, select the Allow external out-of-office only option. B. On the remote domain *, select the Allow external out-of-office and out-of-office set by Outlook 2003 or earlier clients and set on Exchange 2003 or earlier servers option. C. Add a new remote domain for *.contoso.com and select the Allow external out-of-office only option. D. Add a new remote domain for *.contoso.com, and select the Allow internal out-of-office and out-of-office set by Outlook 2003 or earlier clients and set on Exchange 2003 or earlier servers option.
|
|
View Answer |
|
ou need to configure a public folder to replicate on only Saturdays and Sundays. You also need to ensure that posts will be denied after the folders size reaches 500 MB. Which cmdlet should you run for the public folder? A. Set- PublicFolder - StorageQuota 500MB. ReplicationSchedule “Saturday.12:00 AM- Sunday.11:59 PM” B. Set- PublicFolder - PostStorageQuota 500MB. ReplicationSchedule “Saturday.12:00 AM- Sunday.1 1:59 PM” C. Set- PublicFolder - MaxltemSize 500MB. ReplicationSchedule “Saturday.12:00AM- Sunday.11:59 PM” D. Set- PublicFolder - PostStorageQuota 500MB. UseDatabaseRetentionDefaults : $true
|
|
View Answer |
|
All users can receive e-mail that is sent directly to them from the Internet. A distribution group named WebResponse is configured to accept e-mail from all users. All corporate users can send messages to the WebResponse distribution group by using Microsoft Office Outlook. AII messages that are sent to the distribution group from the Internet are rejected. You need to allow e-mail from internal and Internet users to be sent to the SMTP address of the WebResponse distribution group. What should you do? A. Modify the properties of the WebResponse distribution group so that the Everyone group has the Send As permission. B. Modify the properties of the WebResponse distribution group so that the group no longer requires all senders to be authenticated. C. Modify the SMTP Receive connectors on each Hub Transport server to allow anonymous users. D. Modify the properties of the WebResponse distribution group so that the group is no longer hidden from the Outlook global address list (GAL).
|
|
View Answer |
|
You are creating a cluster continuous replication (CCR) cluster. You create a failover cluster and you install the Mailbox server role named ExchMB1 on the active node. You need to install the Mailbox server role on the passive node. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Run the Enable-StorageGroupCopy -Identity ExchMB1SG1 command. B. Run the Setup /roles:Mailbox command. C. Run the Setup /newcms /CMSname:ExchMB1 command. D. Select the Passive Clustered Mailbox Role check box in the Exchange Server 2007 Setup
|
|
View Answer |
|
An Exchange Server 2007 computer name d Exch1 fails. You build a new Microsoft Windows Server 2003 computer named Exch1 to replace the failed computer. Before you restore the mailbox databases from backup, you need to restore the Exchange Mailbox server role on Exch1. What should you do? A. Restore the System State data and the Microsoft Information Store data. B. Run the Setup /NewProvisionedServer/role:Mailbox command. C. Run the Setup /m:lnstall /role: Mailbox command. D. Run the Setup /m:RecoverServer command.
|
|
View Answer |
|
Consumers found that their licit message were sened to the Junk folders of the MS-Office Outlook client application. You can make sure that the sender's email address were on the Outlook Safe-Senders List. Now you are asked to solve this problem, at first you have to make the consumer-defined Safe-senders List to be used while the email was delivered on the Exchange Edge Transport server. How to achieve it? A. Enable anti-spam updates on the Edge Transport server. B. On the Edge Transport server content filter configuration, enable authenticated message bypass. C. Run the mailbox server content filter configuration and enable the Outlook E-mail Postmark validation. D. Run the Update-SafeList cmdlet for each users mailbox on the Mailbox server.
|
|
View Answer |
|
In your Exchange Server 2007 organization, a report of the Exchange server settings indicates that the storage limits for the mailbox stores are not all the same. You need to create an Exchange Management Shell script that will reconfigure all of the Exchange server mailbox stores to have identical storage limits. How should you create the script to accomplish this goal? A. Redirect the output of the Get-ExchangeServer cmdlet to the Set-Mailbox Database cmdlet with the appropriate parameters. B. Redirect the output of the Get-MailboxDatabase cmdlet to the Set-Mailbox cmdlet with the appropriate parameters. C. Redirect the output of the Get-MailboxDatabase cmdlet to the Set-MailboxDatabase cmdlet with the appropriate parameters. D. Redirect the output of the Get-Mailbox cmdlet to the Set-MailboxDatabase cmdlet with the appropriate parameters.
|
|
View Answer |
|
Question: 43 You need to generate a report on all of the Exchange Server 2007 computer s in your Exchange organization. The report must include: Operating system version Number of processors Total physical memory Number of storage groups Number of mailbox databases What should you do? A. Run the Get-ExchangeServer | Format-List cmdlet. B. Run the Get-OrganizationConfig cmdlet. C. Run the Test-SystemHealth cmdlet. D. Run the Health Check scan in the Exchange Best Practices Analyzer.
|
|
View Answer |
|
ou are preparing to configure Outlook Anywhere on your existing Exchange Server 2007 organization. A Mailbox server named ExchMb1 contains all of the mailboxes that will be accessed by users who use Outlook Anywhere. A Client Access server named ExchCas1 is available from the Internet. Users will access Outlook Anywhere with mail .contoso.com as the host (A) name. You need to configure the Exchange organization so that Outlook Anywhere can be used by Microsoft Office Outlook clients from the Internet. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. Install RPC over HTTP Proxy on ExchCas1. B. Install a valid SSL certificate for ExchMb1 on the default Web site. C. Install a valid SSL certificate for ExchCas1 on the default Web site. D. Install RPC over HTTP Proxy on ExchMb1. E. Run the Enable-OutlookAnywherE.Server:ExchCas1 -ExternalHostName:mail.contoso.com – SSLOffLoading:$falsE.ExternalAuthenticationMethod:Basic cmdlet. F. Run the Enable-Outlook4nywherE.Server:ExchMb1 -ExternalHostName:mail.contoso.com – SSLOffLoading:$truE.ExternalAuthenticationMethod:Basic cmdlet.
|
|
View Answer |
|
Users report that legitimate e-mail messages are being delivered to their Microsoft Office Outlook Junk E-mail folders. You confirm that the e-mail addresses of the message senders were on the Outlook Safe Senders List. You need to allow user -defined Safe Senders Lists to be used during the Exchange Edge Transport server message delivery. What should you do? A. On the Mailbox server content filter configuration, enable Outlook E-mail Postmark validation. B. On the Edge Transport server content filter configuration, enable authenticated message bypass. C. Enable anti-spam updates on the Edge Transport server. D. Run the Update-SafeList cmdlet for each users mailbox on the Mailbox server.
|
|
View Answer |
|
n Microsoft Exchange Server 2007,the Hub Transport server role was referred to as the Bridgehead server role. Deployed inside your Active Directory directory service forest, the Hub Transport server role handles all mail flow inside the organization, applies transport rules, applies journaling policies, and delivers messages to a recipient's mailbox. Messages that are sent to the Internet are relayed by the Hub Transport server to the Edge Transport server role that is deployed in the perimeter network. Messages that are received from the Internet are processed by the Edge Transport server before they are relayed to the Hub Transport server. Company has 5 Active Directory sites that are configured as shown in the exhibit. Each site has an Exchange Server 2007 Mailbox server and Hub Transport server. Currently all outbound e-mail traffic goes through the New York site. Mike is required to reconfigure the mail flow so that all outbound e-mail messages that are sent from users in the Seattle office are sent out of your Exchange organization through ExchHub5 in the Chicago office. What should Mike run? A. Set- AdsiteLink -Id DNVR-CHI - ADCost 10 B. Set- SendConnector -Identity 'Seattle' - AddressSpaces:'smtp :*;1' - DNSRoutingEnabled:$false -SourceTransportServers:'ExchHub1' C. New- SendConnector -Name 'Chicago' - AddressSpaces:'smtp :*;1' - DNSRoutingEnabled:$true -SourceTransportServers:'ExchHub5' D. Set- AdSitE.Identity Chicago - HubSiteEnabled:$true
|
|
View Answer |
|
Which of the following approaches to data gathering will produce the most usable performance baseline for a Windows NT network server? A. Using the Chart View in Performance Monitor, collect computer and network utilization statistics every 15 minutes for two working days. B. Using the Log View in Performance Monitor, collect processor, memory, logicaldisk, and network counters every 15 minutes for two working days. C. Using the Chart View in Performance Monitor, collect computer and network utilization statistics every hour for a week. D. Using the Log View in Performance Monitor, collect processor, memory, logicaldisk, and network counters every hour for a week.
|
|
View Answer |
|
Question: 32 Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR). The Microsoft Windows Cluster service (MSCS) is installed on two servers named Server1 and Server2. The default cluster that runs on the MSCS cluster is named Clus1. The cluster mailbox server (CMS) is named ExchCMS1. Currently Clus1 and ExchCMS1 are running on the Server1 cluster node, and the CCR replica is running on the Server2 cluster node. You need to back up the CCR replica. In the backup application, which name should you specify? A. Server1 B. Server2 C. ExchCMS1 D. Clus1
|
|
View Answer |
|
A mailbox has 40 KB of mailbox rules. You need to move the mailbox from your Exchange Server 2007 computer to an Exchange Server 2003 computer at a remote site. How should you achieve this goal? A. Use the Exchange Task wizard in Exchange Server 2003. B. Use the Move Mailbox wizard in Exchange Server 2007. C. Run the Move-Mailbox cmdlet with the IgnoreRuleLimitErrors parameter. D. Run the Move-Mailbox cmdlet with the IgnorePolicyMatch parameter.
|
|
View Answer |