|
Question |
Rating |
View Answer |
 |
Your Exchange Server 2007 computers are configured with the default settings. You need to
send copies of all e-mail messages that are sent and received by [email protected] to
[email protected]. What should you do?
A. Run the New-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ –
Scope:’Global’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet.
B. Run the New-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ –
Scope:’lnternal’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet.
C. Run the Set-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ –
Scope:’Global’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet.
D. Configure e-mail forwarding on the users account. Set it to forward e-mail to
[email protected].
|
|
View Answer |
|
Your company purchases a company named Contoso Ltd. Your company plans to accept e-mail
messages that are sent to the contoso.com e-mail namespace on your companys existing e-mail
servers. The Contoso Ltd., e-mail servers will be decommissioned. You need to configure your
companys Exchange 2007 organization to accept all e-mail messages that are sent to
contoso.com. What should you do?
A. Add contoso.com to the accepted domains as an external relay domain.
B. Add contoso.com to the accepted domains as an internal relay domain.
C. Add contoso.com to the accepted domains as an authoritative domain.
D. Add a new e-mail address generation policyforcontoso.com.
|
|
View Answer |
|
Your company merges with Contoso, Ltd. Each companys mixed e-mail system includes
Exchange Server 2003 servers and Exchange Server 2007 servers and Outlook 2003 clients and
Outlook 2007 clients. Currently your company has a single remote SMTP domain for *, which is
configured with the Allow none option. You need to configure the delivery of out-of-office (OOF)
messages to the contoso.com domain, and you must ensure that no users outside of the two
merged companies can receive OOF messages. What should you do?
A. On the remote domain *, select the Allow external out-of-office only option.
B. On the remote domain *, select the Allow external out-of-office and out-of-office set by
Outlook 2003 or earlier clients and set on Exchange 2003 or earlier servers option.
C. Add a new remote domain for *.contoso.com and select the Allow external out-of-office only
option.
D. Add a new remote domain for *.contoso.com, and select the Allow internal out-of-office and
out-of-office set by Outlook 2003 or earlier clients and set on Exchange 2003 or earlier servers
option.
|
|
View Answer |
|
An Exchange Server 2007 clustered mailbox server is installed on a Single Copy Cluster (SCC).
You want to add another storage group and database to the clustered mailbox server.
You perform the following actions.
1. On the active and passive nodes of the cluster, mount a new database drive to
D:mountsSG5DB5_1 and mount a new log drive to D:mountsSG5Log5_1.
2. Create a new storage group named SG5, and point the log path to D:mountsSG5Log5_1.
3. Create a new database in SG5 named DB5_1 and point the database path to
D:mountsSG5DB5_1.
You need to complete the addition of the storage group and database to the clustered mailbox
server.
What should you do?
A. Change the mount location of the database and log drives to drive letter locations on the
active and passive nodes.
B. Remove the drives from the passive node until the active node is configured.
C. Add the drives as a cluster resource, and make the Microsoft Information Store dependent on
those resources.
D. Add the drives as a cluster resource, and make the storage group dependent on those
resources.
|
|
View Answer |
|
Your Exchange Server 2007 organization is configured in two Active Directory sites named Site1
and Site2. Site1 is configured for the 10.10.5.0/24 subnet, and Site2 is configured for the
10.10.20.0/24 subnet.
The Exchange servers in the two sites are shown in the following table.
ExchCAS1 fails. Site2 users report that they are unable to access Microsoft Office Outlook Web
Access (OWA).
You need to restore OWA service to Site2 users.
What should you do?
A. On ExchMbCAS1, create a new OWA virtual directory.
B. Move the mailbox configuration of the users on ExchCMS1 to ExchMbCAS1.
C. Add the Client Access server role to ExchHub2.
D. Add the Client Access server role to ExchHub1. |
|
View Answer |
|
Your environment contains t he following servers:
Mailbox server named ExchMb1
Client Access server named ExchCAS1
Standby Microsoft Windows Server 2003 computer named Server2
Two Hub Transport server s named ExchHub1 and ExchHub2 ExchHub1 fails.
You need to restore ExchHub1 to its pre- failure configuration
What should you do?
A. Rename Server2 to ExchHub1, and run the Setup /m:RecoverServer command on ExchHub1.
B. Rename Server2 to ExchHub1, and run the Setup /m:lnstall /role:HT command on ExchHub1.
C. On ExchHub2, run the Setup /m:RecoverServer command.
D. On ExchHub2, run the Setup /m:lnstall /role:HT command.
|
|
View Answer |
|
Your Exchange Server 2007 environment has three Exchange servers that have the Mailbox
server role installed. The servers are configured to back up the existing Windows event logs and
mailbox databases. You add the Hub Transport server role to the Exchange servers. You want to
reconfigure the backups for the servers. Written company policy states that enough information
must be retained to perform a root cause analysis on lost or corrupted e-mail messages and to
recover as much data as possible in the event of a failure. You need to add backups for the Hub
Transport server role. What should you add to the current backups?
A. the TransportRolesLogs directory
B. the TransportRolesdataQueue directory
C. the Microsoft Information Store
D. the IIS metabase
|
|
View Answer |
|
A users e-mail account is configured to use POP3. The users mailbox is accidentally purged from
the Exchange Server 2007 Mailbox server. You restore a backup copy of the database that
contained the mailbox to a recovery storage group on the same server. The user reports that he
can not access his mailbox. You need to ensure that the user can access his mailbox. Before you
reconnect the mailbox, what should you do?
A. Enable POP3 access on the mailbox.
B. Move the mailbox to a standard storage group.
C. Instruct the user to use IMAP to connect to the mailbox.
D. Instruct the user to use Outlook Web Access to connect to the mailbox.
|
|
View Answer |
|
Your company is preparing to move selected users to a new Exchange Server 2007 Mailbox
server. The time window for the user move and other existing time windows, are shown in the
following table.
Current backups take three hours to complete, and you expect that time to increase to four hours
after the user moves begin.
You need to create a new time window for the backups that will have minimal effect on the server
Which time window should you create for the backups?
A. 20:00 - 24:00
B. 18:00 - 22:00
C. 02:00 - 06:00
D. 19:00 - 23:00
|
|
View Answer |
|
You install an Exchange Server 2007 Mailbox server. You want to create a full database backup
before you place users on the system. You take all databases offline so that they are consistent.
You initiate a backup by using the Microsoft Windows Backup utility. The backup immediately
fails, and you receive an error message. You need to complete a full backup of the databases.
What should you do?
A. Run the backup from the command line, with the /SNAP:ON switch.
B. Run the backup from the command line, with the /FU switch.
C. Shut down the information store, and restart the backup.
D. Mount all databases on the server, and restart the backup.
|
|
View Answer |
|
An Exchange Server 2007 Hub Transport server named ExchHub1 fails. You build a new Hub
Transport server named ExchHub2 to replace ExchHub1.
After service is restored you want to recover all e-mail messages that remain in the mail.que
database on ExchHub1. You perform the following actions on ExchHub2.
Flush all messages from the existing queue on ExchHub2
Copy the mail.que database from the hard disk on ExchHub1 to C: ecoveryQueue on ExchHub2.
You need to complete the recovery of the mail.que database from ExchHub1.
Which two actions should you perform on ExchHub2? (Each correct answer presents part of the
solution. Choose two.)
A. Using the Database Recovery Management tool, perform a repair of the mail.que database in
C: ecoveryQueue.
B. Using the ISInteg utility, fix the mail.que database in C: ecoveryQueue.
C. Using the Eseutil utility, perform a recovery of the mail.que database in C: ecoveryQueue.
D. Using the Eseutil utility, perform a restore of the mail.que database in C: ecoveryQueue.
E. Using the Eseutil utility, perform a defragmentation of the mail.que database in
C: ecoveryQueue.
|
|
View Answer |
|
You need to find out if users can log on to your Mailbox server directly by using Microsoft Office
Outlook. Which cmdlet should you run on the client network?
A. Test- ServiceHealth
B. Test- SystemHealth
C. Test- MAPIConnectivity
D. Test- OutlookWebServices
|
|
View Answer |
|
The Mailbox server role and the Hub Transport server role reside on an Exchange Server 2007
computer named Exch1. You need to configure the server to retain the tracking logs for seven
days. What are two possible ways to achieve this goal? (Each correct answer presents a
complete solution. Choose two.)
A. Create a system policy to remove log files that are older than seven days.
B. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
C. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogEnabled:$true cmdlet.
D. Run the Set-TransportConfig -Identity Exch1 -MaxDumpsterTime 07.00:00:00 cmdlet.
E. Run the Set-MailboxServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
|
|
View Answer |
|
Your Exchange Server 2007 environment contains a single Hub Transport server and a single
Mailbox server. E-mail delivery to large dynamic distribution group s is slow. All
MSExchangeADAccess Processes Performance Monitor counters on your Exchange servers
display normal results. You need to improve delivery time for messages that are sent to dynamic
distribution groups. What should you do?
A. Add more RAM to the existing Mailbox server.
B. Add more RAM to the existing domain controllers.
C. Deploy an additional global catalog server. Configure the existing Hub Transport server to use
the new global catalog server.
D. Deploy a second Hub Transport server. Configure the dynamic distribution groups to use the
new Hub Transport server as their expansion server.
|
|
View Answer |
|
Users report that they are unable to access their mailboxes on an Exchange Server 2007
computer named Exch1. You verify that connectivity to the server is functioning and that server
hardware is functioning normally. Access to global catalogs is also functioning normally. You
need to report on the status of all required Exchange-specific and Exchange-dependent services.
What should you do?
A. From the Exchange Troubleshooting Assistant, run the Database Troubleshooter.
B. Run the Test-ServiceHealth -Server Exch1 cmdlet.
C. Run the Test-SystemHealth -Server Exch1 cmdlet.
D. Run the Get-ExchangeServer-ldentityExch1 cmdlet.
|
|
View Answer |
|
Your native Exchange Server 2007 organization has a single Edge Transport server named Exch
Edge1. Exch Edge1 has an Edge Subscription established with a Hub Transport server named
Exch Hub1. The network connection from Exch Edge1 to the Internet is interrupted for an
extended period of time. After the network connection is restored, no messages are being
delivered. You need to restore message flow immediately. What should you do?
A. On ExchHub1, run the Resume-Queue cmdlet.
B. On ExchHub1, run the Retry-Queue cmdlet.
C. On ExchEdge1, run the Resume-Queue cmdlet.
D. On ExchEdge1, run the Retry-Queue cmdlet.
|
|
View Answer |
|
Your Exchange Server 2007 organization contains a single Hub Transport server named Exch
Hub1, and multiple Mailbox servers. A single Edge Transport server named Exch Edge1 is
deployed. Message tracking logs are retained for 30 days. The mailbox for a user named Marc is
located on a Mailbox server named Exch MB1 and has an SMTP address of [email protected].
You need to generate a report that indicates the total number of messages that Marc sent during
the last 30 days. What should you do?
A. On ExchEdge1, run the Get-MessageTrackingLog -Sender [email protected] -EventId
“Receive” | export-csv c: mpmarc.csv cmdlet.
B. On ExchHub1, run the Get-MailboxStatistics -Identity marc | export-csv -path c: mpmarc.csv
cmdlet.
C. On ExchHub1, run the Get-MailboxFolderStatistics -Identity marC.FolderScope SentItems |
export-csv c: mpmarc.csv cmdlet.
D. On ExchHub1, run the Get-MessageTrackingLog -Sender [email protected] -EventId
“Receive” | export-csv c: mpmarc.csv cmdlet.
|
|
View Answer |
|
You need to configure the minimum permissions necessary for a user to be able to configure
mailbox databases on an Exchange Server 2007 computer. What should you do?
A. Delegate Exchange Administrator privileges to the user account at the organization level.
B. Add the user account to the Exchange Server Administrators role.
C. Add the user account to the Exchange Recipient Administrators role.
D. Add the user account to the Exchange Organization Administrators role.
|
|
View Answer |
|
You need to configure the minimum permissions necessary for a new administrator so that she
can prepare Active Directory for Exchange Server 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Add the new administrator as an Exchange Full Administrator at the organization level.
B. Add the new administrators user account to the Exchange Enterprise Servers group.
C. Add the new administrators user account to the Domain Admins group.
D. Add the new administrators user account to the Enterprise Admins group.
E. Add the new administrators user account to the Schema Admins group.
|
|
View Answer |
|
A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007
Edge Transport server named Exch1. You want to apply this policy to a new Edge Transport
server named Exch2. You install SCW on Exch2. You copy the existing SCW policy to Exch2 as
C:ExchangeSCWPolicy.xml. You need to apply the custom policy to Exch2. What should you
do?
A. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007KB” /kbfile:“%programfiles%MicrosoftExchange
ServerscriptsExchange2007Edge.xml” command.
B. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007EdgeKB” /kbfile:”%programfiles%MicrosoftExchange
ServerscriptsExchange2007.xml” command.
C. First, run the Scwcmd register /kbname:” Ex2007KB “ / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 Edge .xml” command. Then, use SCW to
apply the C:ExchangeSCWPolicy.xml policy.
D. First, run the Scwcmd register /kbname:”Ex2007EdgeKB” / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 .xml” command. Then, use SCW to apply
the C:ExchangeSCWPolicy.xml policy.
|
|
View Answer |
QUESTIONS LISTING
Payment of time- barred debt is:
(a) Valid
(b) Void
(c) Illegal
(d) Voidable