|
Related Questions |
View Answer |
|
Your native Exchange Server 2007 organization has a single Edge Transport server named Exch
Edge1. Exch Edge1 has an Edge Subscription established with a Hub Transport server named
Exch Hub1. The network connection from Exch Edge1 to the Internet is interrupted for an
extended period of time. After the network connection is restored, no messages are being
delivered. You need to restore message flow immediately. What should you do?
A. On ExchHub1, run the Resume-Queue cmdlet.
B. On ExchHub1, run the Retry-Queue cmdlet.
C. On ExchEdge1, run the Resume-Queue cmdlet.
D. On ExchEdge1, run the Retry-Queue cmdlet.
|
View Answer
|
|
|
Your Exchange Server 2007 organization contains a single Hub Transport server named Exch
Hub1, and multiple Mailbox servers. A single Edge Transport server named Exch Edge1 is
deployed. Message tracking logs are retained for 30 days. The mailbox for a user named Marc is
located on a Mailbox server named Exch MB1 and has an SMTP address of [email protected].
You need to generate a report that indicates the total number of messages that Marc sent during
the last 30 days. What should you do?
A. On ExchEdge1, run the Get-MessageTrackingLog -Sender [email protected] -EventId
“Receive” | export-csv c: mpmarc.csv cmdlet.
B. On ExchHub1, run the Get-MailboxStatistics -Identity marc | export-csv -path c: mpmarc.csv
cmdlet.
C. On ExchHub1, run the Get-MailboxFolderStatistics -Identity marC.FolderScope SentItems |
export-csv c: mpmarc.csv cmdlet.
D. On ExchHub1, run the Get-MessageTrackingLog -Sender [email protected] -EventId
“Receive” | export-csv c: mpmarc.csv cmdlet.
|
View Answer
|
|
|
You need to configure the minimum permissions necessary for a user to be able to configure
mailbox databases on an Exchange Server 2007 computer. What should you do?
A. Delegate Exchange Administrator privileges to the user account at the organization level.
B. Add the user account to the Exchange Server Administrators role.
C. Add the user account to the Exchange Recipient Administrators role.
D. Add the user account to the Exchange Organization Administrators role.
|
View Answer
|
|
|
You need to configure the minimum permissions necessary for a new administrator so that she
can prepare Active Directory for Exchange Server 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Add the new administrator as an Exchange Full Administrator at the organization level.
B. Add the new administrators user account to the Exchange Enterprise Servers group.
C. Add the new administrators user account to the Domain Admins group.
D. Add the new administrators user account to the Enterprise Admins group.
E. Add the new administrators user account to the Schema Admins group.
|
View Answer
|
|
|
A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007
Edge Transport server named Exch1. You want to apply this policy to a new Edge Transport
server named Exch2. You install SCW on Exch2. You copy the existing SCW policy to Exch2 as
C:ExchangeSCWPolicy.xml. You need to apply the custom policy to Exch2. What should you
do?
A. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007KB” /kbfile:“%programfiles%MicrosoftExchange
ServerscriptsExchange2007Edge.xml” command.
B. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007EdgeKB” /kbfile:”%programfiles%MicrosoftExchange
ServerscriptsExchange2007.xml” command.
C. First, run the Scwcmd register /kbname:” Ex2007KB “ / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 Edge .xml” command. Then, use SCW to
apply the C:ExchangeSCWPolicy.xml policy.
D. First, run the Scwcmd register /kbname:”Ex2007EdgeKB” / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 .xml” command. Then, use SCW to apply
the C:ExchangeSCWPolicy.xml policy.
|
View Answer
|
|
|
You install an Exchange Server 2007 Edge Transport server role and Hub Transport server role.
The server that has the Hub Transport server role is located in an Active Directory site named
Chicago. You need to synchronize your companys Active Directory information to the server that
has the Edge Transport server role. Which two actions should you perform? (Each correct answer
presents part of the solution. Choose two.)
A. Run the New- EdgeSubscription - FileName “c:EdgeserverSubscription.xml “ cmdlet on the
server that has the Edge Transport server role.
B. Run the New-EdgeSubscription -FileName “c:EdgeServerSubscription.xml” ?site “Chicago”
cmdlet on the server that has the Hub Transport server role.
C. Run the ADAMSync command on the server that has the Edge Transport server role.
D. Run the ExportEdgeConfig -CloneConfigData “C:CloneConfigData.xml” command on the
server that has the Edge Transport server role.
E. Run the ImportEdgeConfig - CloneConfigData “ C:CloneConfigData.xml “ command on the
server that has the Edge Transport server role.
|
View Answer
|
|
|
Your company s Active Directory forest consists of a single site that has a root domain and one
child domain.
You need to prepare Active Directory and the domains prior to installing the first Exchange Server
2007 computer. Which two commands should you run? (Each correct answer presents part of the
solution. Choose two.)
A. Setup /ForestPrep
B. Setup /PrepareAD
C. Setup /DomainPrep
D. Setup /PrepareAllDomains
|
View Answer
|
|
|
You have just finished installing a NetWare 6.5 server named WIDGET1
into a new eDirectory tree named WIDGET-TREE. The server's context is .SLC.WIDGET. The Admin
user for this tree has been created in .CORP.WIDGET. During installation, Admin was automatically
made an explicit trustee of and granted the Supervisor right to which object in the tree?
A. O=WIDGET
B. The tree root
C. OU=SLC.O=WIDGET
D. OU=CORP.O=WIDGET
E. CN=WIDGET1.OU=SLC.O=WIDGET
|
View Answer
|
|
|
You are creating a cluster continuous replication (CCR) cluster. You create a failover cluster and
you install the Mailbox server role named ExchMB1 on the active node. You need to install the
Mailbox server role on the passive node. What are two possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose two.)
A. Run the Enable-StorageGroupCopy -Identity ExchMB1SG1 command.
B. Run the Setup /roles:Mailbox command.
C. Run the Setup /newcms /CMSname:ExchMB1 command.
D. Select the Passive Clustered Mailbox Role check box in the Exchange Server 2007 Setup
wizard.
E. Select the Mailbox Role check box in the Exchange Server 2007 Setup wizard.
|
View Answer
|
|
|
Your companys e-mail domain is contoso.com. Three Edge Transport servers in your Exchange
Server 2007 organization will accept Internet mail. The servers are named Exch1, Exch2, and
Exch3. You need to load balance Exch2 and Exch3 and you need to configure Exch1 as a
backup server. Which three MX records should you specify? (Each correct answer presents part
of the solution. Choose three.)
A. contoso.com MX preference = 10, mail exchanger = Exch1 .contoso.com
B. contoso.com MX preference = 10, mail exchanger = Exch3.contoso.com
C. contoso.com MX preference = 10, mail exchanger = Exch2.contoso.com
D. contoso.com MX preference = 20, mail exchanger = Exch2.contoso.com
E. contoso.com MX preference = 20, mail exchanger = Exch1 .contoso.com
F. contoso.com MX preference = 20, mail exchanger = Exch3.contoso.com
|
View Answer
|
|
|
You are preparing to transition from Exchange 2000 Server to Exchange Server 2007. The
environment consists of a single Windows 2000 native mode Active Directory domain and an
Exchange 2000 organization running in mixed mode. The schema master, domain naming
master, and PDC emulator all run on a Microsoft Windows 2000 Server domain controller. You
need to prepare the environment for Exchange 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Move the PDC emulator role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
B. Move the schema master role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
C. Move the domain naming master role to a domain controller that runs Windows Server 2003
with Service Pack 1.
D. Convert the Exchange 2000 organization to native mode.
|
View Answer
|
|
|
You need to ensure that an administrator named Marc is able to create a Send connector on a
Hub Transport server. You need to achieve this goal by assigning only the minimum permissions
necessary. What should you do?
A. Run the Add-ExchangeAdministrator ?Role ServerAdmin ?identity Marc cmdlet.
B. Run the Add-ExchangeAdministrator ?Role OrgAdmin ?identity Marc cmdlet.
C. Delegate Exchange Full Administrator privileges to Marc at the organization level.
D. Add Marc to the Domain Admins group.
|
View Answer
|
|
|
You need to identify the Exchange Server 2007 server role that must be installed on a stand-
alone server. Which server role should you identity?
A. ClientAccess
B. Edge Transport
C. Hub Transport
D. Mailbox
|
View Answer
|
|
|
You are preparing to install the Mailbox server role on a new Exchange Server 2007 computer.
You need to optimize read and write performance on this server. You also need to provide
redundancy on this server. On which type of array should you place the mailbox database?
A. RAID 1 containing the operating system partition
B. RAID 1 dedicated
C. RAID 0 dedicated
D. RAID 10 dedicated
|
View Answer
|
|
|
Your companys Active Directory structure contains a root domain in site A and a single child
domain in site B. You are preparing to install Exchange Server 2007 in the child domain. In the
root domain, you run the Setup /PrepareAD command. You need to ensure that you can install
Exchange in the child domain. What are two possible ways to achieve this goal? (Each correct
answer presents a complete solution. Choose two.)
A. In the child domain, run the Setup /DomainPrep command.
B. In the child domain, run the Setup /PrepareDomain command.
C. In the root domain, run the Setup /ForestPrep command.
D. In the root domain, run the Setup /PrepareDomain command.
E. In the root domain, run the Setup /PrepareAllDomains command.
|
View Answer
|
|
|
You are performing a new installation of Exchange Server 2007. You complete the installation of
a Hub Transport server named ExchHub1 and an Edge Transport server named ExchEdge1.
You need to configure the e-mail routing to meet the following requirements.
Configure ExchHub1 to route Internet e-mail to ExchEdge1.
Configure ExchEdge1 to route e-mail between your Exchange organization and the Internet.
Which two sets of actions should you perform? (Each correct answer presents part of the
solution. Choose two.)
A. On ExchHub1, create a new Send connector named Hub Edge.
Add the * domain as an address space and specify to use DNS to route e-mail automatically.
Add ExchHub1 as a source server.
B. On ExchEdge1, open the Exchange Management Shell.
Export a new Edge Subscription file.
C. On ExchEdge1, create a new Send connector named EdgE. Internet.
Add the * domain as an address space and specify to use DNS to route e-mail automatically.
Add ExchEdge1 as a source server.
D. On ExchHub1, open the Exchange Management Console.
Import the Edge Subscription file.
|
View Answer
|
|
|
Your company has four Active Directory sites. A Hub Transport server role and a Mailbox server
role are installed at each site. The network is configured as shown in the following diagram.
You need to ensure that messages between the Chicago and Seattle sites are routed through
ExchHub2 in the Dallas site.
Which cmdlet should you run?
A. Set- AdSiteLink -Identity SEA-DAL - ExchangeCost 5
B. Set- AdSiteLink -Identity SEA-DAL - ExchangeCost 25
C. Set- AdSitE. Identity Dallas - HubSiteEnabled $false
D. Set- AdSitE. Identity Dallas - HubSiteEnabled $true
|
View Answer
|
|
|
Your Exchange Server 2007 organization contains a Client Access server and a Hub Transport
server. The Client Access server fails. You need to add the Client Access server role to the
existing Hub Transport server. What are two possible ways to achieve this goal? (Each correct
answer presents a complete solution. Choose two.)
A. Use the Add or Remove Programs applet in Control Panel.
B. Run the exsetup /mode:recoverserver /roles:ClientAccess command.
C. Run the exsetup /mode:install /roles:ClientAccess command.
D. Run the exsetup /mode:install /roles:ClientAccess, HubTransport command.
E. Use Exchange System Manager, and configure the server as a front-end server.
|
View Answer
|
|
|
You are installing a two-node Single Copy Cluster (SCC) Mailbox server. You name the two
network adapters Private and Public. You need to configure the TCP/IP binding order for the
cluster servers. What should you do?
A. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Private network to the top.
B. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Public network to the top.
C. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Private connection to the top.
D. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Public connection to the top.
|
View Answer
|
|
|
You need to generate a report on all of the Exchange Server 2007 computer s in your Exchange
organization. The report must include:
Operating system version
Number of processors
Total physical memory
Number of storage groups
Number of mailbox databases
What should you do?
A. Run the Get-ExchangeServer | Format-List cmdlet.
B. Run the Get-OrganizationConfig cmdlet.
C. Run the Test-SystemHealth cmdlet.
D. Run the Health Check scan in the Exchange Best Practices Analyzer.
|
View Answer
|
DETAILS
Question: Users report that they are unable to access their mailboxes on an Exchange Server 2007
Answer: B. Run the Test-ServiceHealth -Server Exch1 cmdlet.
Rating
(0.2) By 8201 users
Added on
Views
Rate it! 
Answer:
Payment of time- barred debt is:
(a) Valid
(b) Void
(c) Illegal
(d) Voidable