|
Question |
Rating |
View Answer |
|
Windows NT 4.0 is currently installed on the system you are using on an NTFS partition. You want to install Windows 2000 Professional and dual boot NT 4.0 and 2000 professional. What do you need to do?
A. Install Windows 2000 on the same folder that Windows NT is installed in B. Install Windows 2000 on a separate partition from Windows NT 4.0 C. Upgrade Windows NT 4.0 to SP4 or later then install Windows 2000. D. This cannot be accomplished
|
|
View Answer |
|
Your company uses the Volume Shadow Copy Service (VSS) to perform full backups of the Exchange Server 2007 mailbox databases every night. There is a backup window between 20:00 and 24:00 each week night and a backup window between 19:00 and 24:00 on Saturdays and Sundays The full backups currently take five hours to complete. Management requests that you modify the backup configuration to meet the following requirements. At least one full backup must be performed per week. Logs must be truncated more often than once per week. Backups must be performed within the current backup windows Database restores must require no more than two backup files. You need to configure the backups for the mailbox databases to meet the requirements. What should you do? A. Configure differential backups on week nights and full backups on Saturdays and Sundays. B. Configure incremental backups on week nights and full backups on Saturdays and Sundays. C. Configure daily full backups, and throttle the database checksum. D. Configure daily copy backups, and throttle the database checksum.
|
|
View Answer |
|
Marc is Marias assistant. Marc needs to be able to view all of the folders and subfolders in Marias mailbox and to open and respond to Marias e-mail. You need to assign Marc the appropriate permissions. What should you do? A. Run the Add-ADPermission -Identity Maria ?User Marc ?AccessRights Self ?ExtendedRights Send-As cmdlet. B. Run the Add-MailboxPermission ?Identity Maria ?User Marc ?AccessRights ExternalAccount cmdlet C. Run the Add-MailboxPermission ?Identity Maria ?User Marc ?AccessRights FullAccess cmdlet. D. In the Active Directory Users and Computers management console, assign Marc the Allow- Full Control permission for Marias user account.
|
|
View Answer |
|
Your Exchange Server 2007 environment contains a single Hub Transport server and a single Mailbox server. E-mail delivery to large dynamic distribution group s is slow. All MSExchangeADAccess Processes Performance Monitor counters on your Exchange servers display normal results. You need to improve delivery time for messages that are sent to dynamic distribution groups. What should you do? A. Add more RAM to the existing Mailbox server. B. Add more RAM to the existing domain controllers. C. Deploy an additional global catalog server. Configure the existing Hub Transport server to use the new global catalog server. D. Deploy a second Hub Transport server. Configure the dynamic distribution groups to use the new Hub Transport server as their expansion server.
|
|
View Answer |
|
What does the following command do? Set-PublicFolder OHuman ResourcesO -ReplicationSchedule "Saturday.12:00 AM - Monday.12:00 AMO A. Specifies that the Human Resources public folder replicates only on Saturday and Sunday. B. Specifies that the Human Resources public folder replicates only on Saturday, Sunday, and Monday. C. Specifies that the Human Resources public folder replicates only on Sunday. D. Specifies that the Human Resources public folder always uses the default replication schedule of the public folder database.
|
|
View Answer |
|
An Exchange Server 2007 Hub Transport server named ExchHub1 fails. You build a new Hub Transport server named ExchHub2 to replace ExchHub1. After service is restored you want to recover all e-mail messages that remain in the mail.que database on ExchHub1. You perform the following actions on ExchHub2. Flush all messages from the existing queue on ExchHub2 Copy the mail.que database from the hard disk on ExchHub1 to C: ecoveryQueue on ExchHub2. You need to complete the recovery of the mail.que database from ExchHub1. Which two actions should you perform on ExchHub2? (Each correct answer presents part of the solution. Choose two.) A. Using the Database Recovery Management tool, perform a repair of the mail.que database in C: ecoveryQueue. B. Using the ISInteg utility, fix the mail.que database in C: ecoveryQueue. C. Using the Eseutil utility, perform a recovery of the mail.que database in C: ecoveryQueue. D. Using the Eseutil utility, perform a restore of the mail.que database in C: ecoveryQueue. E. Using the Eseutil utility, perform a defragmentation of the mail.que database in C: ecoveryQueue.
|
|
View Answer |
|
Your Exchange Server 2007 computers are configured with the default settings. You need to send copies of all e-mail messages that are sent and received by [email protected] to [email protected]. What should you do? A. Run the New-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ – Scope:’Global’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet. B. Run the New-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ – Scope:’lnternal’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet. C. Run the Set-JournalRulE.Name:’User’ -JournalEmailAddress:’[email protected]’ – Scope:’Global’ -Enabled:$truE.Recipient:’[email protected]’ cmdlet. D. Configure e-mail forwarding on the users account. Set it to forward e-mail to [email protected].
|
|
View Answer |
|
You have configured attachment filtering on your organization's edge transport servers. Because some senders are transmitting files that are not harmful, you want to allow hem to be informed that the message containing the attachment has been rejected by your organization. Which of the following configuration settings should you make? A. Configure the attachment filtering behavior action to Strip B. Configure the attachment filtering behavior action to SilentDelete C. Configure the attachment filtering behavior action to Reject D. Configure a ConnectorException
|
|
View Answer |
|
You need to install the necessary components prior to installing Exchange Server 2007 on a new server. Which three components should you install? (Each correct answer presents part of the solution. Choose three.) A. Windows PowerShell 1.0 B. Network News Transfer Protocol (NNTP) C. Simple Mail Transfer Protocol (SMTP) D. Microsoft Management Console (MMC) 3.0 E. Microsoft .NET Framework 1.1 F. Microsoft .NET Framework 2.0
|
|
View Answer |
|
Your Exchange Server 2007 organization contains two Exchange servers named Exch1 and Exch2. Exch1 fails and cannot be restored to service. You need to move all mailboxes from Exch1 to Exch2. Which cmdlet should you run? A. Get-Mailbox -Server Exch1 | Move-Mailbox - IgnorePolicyMatch - TargetDatabase “Exch2First Storage GroupMailbox Database” B. Get-Mailbox -Server Exch1 | Move-Mailbox - IgnoreRuleLimitErrors - TargetDatabase “Exch2First Storage GroupMailbox Database” C. Get-Mailbox -Server Exch1 | Move-Mailbox - ValidateOnly - TargetDatabase “Exch2First Storage GroupMailbox Database” D. Get-Mailbox -Server Exch1 | Move-Mailbox - ConfigurationOnly - TargetDatabase “Exch2First Storage GroupMailbox Database”
|
|
View Answer |
|
A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007 Edge Transport server named Exch1. You want to apply this policy to a new Edge Transport server named Exch2. You install SCW on Exch2. You copy the existing SCW policy to Exch2 as C:ExchangeSCWPolicy.xml. You need to apply the custom policy to Exch2. What should you do? A. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd register /kbname:”Ex2007KB” /kbfile:“%programfiles%MicrosoftExchange ServerscriptsExchange2007Edge.xml” command. B. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd register /kbname:”Ex2007EdgeKB” /kbfile:”%programfiles%MicrosoftExchange ServerscriptsExchange2007.xml” command. C. First, run the Scwcmd register /kbname:” Ex2007KB “ / kbfile:” %programfiles %MicrosoftExchange ServerscriptsExchange2007 Edge .xml” command. Then, use SCW to apply the C:ExchangeSCWPolicy.xml policy. D. First, run the Scwcmd register /kbname:”Ex2007EdgeKB” / kbfile:” %programfiles %MicrosoftExchange ServerscriptsExchange2007 .xml” command. Then, use SCW to apply the C:ExchangeSCWPolicy.xml policy.
|
|
View Answer |
|
You install an Exchange Server 2007 Mailbox server. You want to create a full database backup before you place users on the system. You take all databases offline so that they are consistent. You initiate a backup by using the Microsoft Windows Backup utility. The backup immediately fails, and you receive an error message. You need to complete a full backup of the databases. What should you do? A. Run the backup from the command line, with the /SNAP:ON switch. B. Run the backup from the command line, with the /FU switch. C. Shut down the information store, and restart the backup. D. Mount all databases on the server, and restart the backup.
|
|
View Answer |
|
An Exchange Server 2007 clustered mailbox server is installed on a Single Copy Cluster (SCC). You want to add another storage group and database to the clustered mailbox server. You perform the following actions. 1. On the active and passive nodes of the cluster, mount a new database drive to D:mountsSG5DB5_1 and mount a new log drive to D:mountsSG5Log5_1. 2. Create a new storage group named SG5, and point the log path to D:mountsSG5Log5_1. 3. Create a new database in SG5 named DB5_1 and point the database path to D:mountsSG5DB5_1. You need to complete the addition of the storage group and database to the clustered mailbox server. What should you do? A. Change the mount location of the database and log drives to drive letter locations on the active and passive nodes. B. Remove the drives from the passive node until the active node is configured. C. Add the drives as a cluster resource, and make the Microsoft Information Store dependent on those resources. D. Add the drives as a cluster resource, and make the storage group dependent on those resources.
|
|
View Answer |
|
Your Exchange Server 2007 organization contains a Client Access server and a Hub Transport server. The Client Access server fails. You need to add the Client Access server role to the existing Hub Transport server. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Use the Add or Remove Programs applet in Control Panel. B. Run the exsetup /mode:recoverserver /roles:ClientAccess command. C. Run the exsetup /mode:install /roles:ClientAccess command. D. Run the exsetup /mode:install /roles:ClientAccess, HubTransport command. E. Use Exchange System Manager, and configure the server as a front-end server.
|
|
View Answer |
|
A mail-enabled public folder named Monitoring receives automated alerts from your companys monitoring system. Some users send e-mail messages to the folder by selecting it from the global address list (GAL) in Microsoft Office Outlook. You need to prevent users from selecting the Monitoring folder from the GAL, and you need to ensure that the monitoring alerts will still be received. What should you do? A. Run the Set-MailPublicFolder cmdlet and set the DisplayName parameter to $false. B. Run the Set-MailPublicFolder cmdlet and set the HiddenFromAddressListsEnabled parameter to $true. C. Run the Set-AddressList “Public Folders” -RecipientFilter “DisplayNamE.is ‘Monitoring’” cmdlet. D. Use the Outlook client to remove the Folder visible attribute for the Default name on the Monitoring public folder.
|
|
View Answer |
|
n your Exchange Server 2007 organization, Microsoft ActiveSync is configured on the Exchange servers but is currently disabled for users. A user in the Exchange organization has a new mobile device. H e wants h is device to synchronize with the Exchange servers over a wireless network. You need to enable the ActiveSync feature for only this user. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Run the Set-Mailbox cmdlet. B. Run the Set-CASMailbox cmdlet. C. Run the Set-ActiveSyncMailboxPolicy cmdlet. D. Use the Active Directory Users and Computers console to enable the ActiveSync feature for the user. E. Use the Exchange Management Console to enable the ActiveSync feature for the user.
|
|
View Answer |
|
Your Exchange Server 2007 organization has two servers named Exch1 and Exch2. You need to move all of the Exch1 mailboxes to Exch2 next Saturday at 11:00 P.M. You will be out of the office at that time. What should you do? A. Run the Set-Mailbox -server Exch1 | Move-mailbox -TargetDatabase “Exch2First Storage GroupMailbox Database” cmdlet with the StartDate parameter set for next Saturday at 11 P.M. B. Run the Set-Mailbox | Move-mailbox -TargetDatabase “Exch2First Storage GroupMailbox Database” cmdlet with the StartDate parameter set for next Saturday at 11 P.M. C. Use Microsoft Windows scheduler to run the Set-Mailbox | Move-mailbox -TargetDatabase “Exch2First Storage GroupMailbox Database” cmdlet from the Exchange Management Shell next Saturday at 11 P.M. D. Use Microsoft Windows scheduler to run the Set-Mailbox -server Exch1 | Move-mailbox – TargetDatabase “Exch2First Storage GroupMailbox Database” cmdlet from the Exchange Management Shell next Saturday at 11 P.M.
|
|
View Answer |
|
Which of the following Receive connector usage types uses Exchange Server authentication as its default authentication mechanism? A. Client B. Internal C. Internet D. Partner
|
|
View Answer |
|
Which new Windows 2000 features lessen the need for rescue boot disks? [Check all correct answers]
A. Safe Boot B. System file protector C. Recovery mode console D. Kerberos
|
|
View Answer |
|
An inappropriate message that has the subject line of Exchange is sent to all users on the Exchange Server 2007 Mailbox server named Exch1. You need to delete this message from all mailboxes. What should you do? A. On Exch1, find the message ID of the original message and then run the Remove-Message – Identity <IDnumber> cmdlet. B. On Exch1, find the message ID of the original message and then run the Export-Message – Identity <IDnumber> c: emp cmdlet. Delete all of the messages in the directory. C. Create a new mailbox named TempMailbox that has a folder named Export. Run the Get- Mailbox -Server Exch1 | Export-Mailbox -TargetMailbox TempMailbox -TargetFolder Export – SubjectKeywords “Exchange” -DeleteContent cmdlet. D. From the Exchange Management Console, create a new transport rule named Exchange delete. Set the condition to “when the Subject field contains Exchange”. Set the action to “silently drop the message”.
|
|
View Answer |