|
INTERVIEW QUESTIONS
SCIENCE
METALLURGY
DETAILS
Question: How much gold concentration should be in the organic phase (DBC) before reduction by oxalic acid solution? Is it effective on purity of gold in reduction step? What is the ratio of DBC to oxalic acid solution in this step?
Answer: It really does not matter the concentration of gold in the DBC, it will respond well to very small concentrations or it will generally load up at about 25 grams of gold in a liter of DBC. This does not present a problem, as the DBC is completely re-useable, although I generally figure on a 3% to 4% loss per cycle in handling, etc. Therefore, if your original acid had 50 grams of gold in it, you would do two extractions into DBC using a liter of the extracting solvent. You should continue to extract from the pregnant gold solution until you are sure no gold is left in it. If the pH of the acid solution is not too high a simple stannous chloride test will tell you if there is still gold in it, and that is sensitive to the ppb level.
|
|
|
Category |
Metallurgy Interview Questions & Answers -
Exam Mode /
Learning Mode
|
Rating |
(0.2) By 9079 users |
Added on |
9/24/2014 |
Views |
63899 |
Rate it! |
|
|
Question:
How much gold concentration should be in the organic phase (DBC) before reduction by oxalic acid solution? Is it effective on purity of gold in reduction step? What is the ratio of DBC to oxalic acid solution in this step?
Answer:
It really does not matter the concentration of gold in the DBC, it will respond well to very small concentrations or it will generally load up at about 25 grams of gold in a liter of DBC. This does not present a problem, as the DBC is completely re-useable, although I generally figure on a 3% to 4% loss per cycle in handling, etc. Therefore, if your original acid had 50 grams of gold in it, you would do two extractions into DBC using a liter of the extracting solvent. You should continue to extract from the pregnant gold solution until you are sure no gold is left in it. If the pH of the acid solution is not too high a simple stannous chloride test will tell you if there is still gold in it, and that is sensitive to the ppb level. Source: CoolInterview.com
If you have the better answer, then send it to us. We will display your answer after the approval.
Rules to Post Answers in CoolInterview.com:-
- There should not be any Spelling Mistakes.
- There should not be any Gramatical Errors.
- Answers must not contain any bad words.
- Answers should not be the repeat of same answer, already approved.
- Answer should be complete in itself.
|
|
Related Questions |
View Answer |
|
Which is the only liquid in which gold is dissolved?
|
View Answer
|
|
What is the metallurgy use? What is the casting and forging?
|
View Answer
|
|
What is proeutectoid ferrite and cementite?
|
View Answer
|
|
How does and why the recrystallization temperature of the metals affects on alloying?
|
View Answer
|
|
How we describe strain aging based on dislocation theory?
|
View Answer
|
|
What are the compositions of brass, how can this metal be heat-treated, what is the melting point of this metal?
|
View Answer
|
|
What is or what characterize the thermodynamic state of metal (structure of metal)?
|
View Answer
|
|
When we do cardonitriding or casehardening operation for a plain carbon steel the case depth, hardness & microstructure are not alike why and what are the basic thing, which makes such a difference.
|
View Answer
|
|
Why we are doing post heating in alloy steel welding?
|
View Answer
|
|
What does allotropic mean what does iron and steel have to do with it?
|
View Answer
|
|
How can you separate gold from mercury?
|
View Answer
|
|
What is the difference between diagrams of IT and CT in heat treatment of steels?
|
View Answer
|
|
What is the metallurgical explanation of effects of chromium, nickel, molybdenum, and carbon in stainless steels?
|
View Answer
|
|
What are the properties and application of manganese steel?
|
View Answer
|
|
What is carbide?
|
View Answer
|
Please Note: We keep on updating better answers to this site. In case you are looking for Jobs, Pls Click Here Vyoms.com - Best Freshers & Experienced Jobs Website.
View All Metallurgy Interview Questions & Answers - Exam Mode /
Learning Mode
|