A column is used to support the weight of the roof and/or the upper floors. Now days, many columns are used for decorative purposes. A column along with load bearing beams can support a lot of weight.

A column is a vertical member made up of concrete and steel used to support the beam and to support the weight of the particular building.

column is a vertical member which is used to transfer the load of structure to the subsoil or substructure.

column is avertical member which transfer the super imposed load dead load etc. to the subsoil

Column is a compression member which takes the structure load and transfer it to subsoil.

The word ?column? is related to building construction. The vertical support which is free from all sides taking the load of beam slab etc. and transfers the load to the earth independently is called column.

Column is constructed with the help of steel bars and cement concrete. In case of multi storey and frame structure building constructions, the entire load is born by columns and the floor area/ internal space of building is freely adjusted according to the requirement.

The size, cement concrete ratio and numbers of steel bars with their diameter are available in structural drawings which are designed according to the load born by the column and factor of safety.

it is a vertical member which transfers the load of top floors directly to the earth surface.
But care should be taken that the load carrying capacity depends on size of the column and also the distance between the successive columns that is 6m (approximately)

The word column is related to building construction.Column is make with the help of steel bars and cement concrete,and used to support the beam and support the weight of the particular building and also used to transfers the load of top floors directly to the earth surface.

column is a vertical member which gives support to the building....as well it gives a decorative look to building.....and on occasions when we decorate a column with flowers it;s js gives awesome look...:)

a column is a vertical member of a building which supports structural loads transferred by the whole structure through beams, then after column transferring those loads to the footing and foundation through to the land

column is vertical member used primarily to support the axial compressive load and with a height of at least three times its lateral dimension and finally transfer the superimposed load and dead load to the sub soil.

column is a vertical compression member which are made by steel and concrete and used to transfer the load of structure(live and dead) to the subsoil or substructure

a column is a vertical member which supports the horizontal members like beams and it transfer the load to the base of the building.

column is a vertical compression member in the construction of buldings.Beacause these vertical members have different names in strctural engineering for ex.in trusses these are called struct.
These are mainly used to transfer the loads (dead+live) from structure to the soil bearing
stratum,and for uniform settlement of structure.

A coloumn is used to support the roof slab and beams, and transfer the load evenly and it should be a vertical structural member.

Column or pillar in architecture and structural engineering is an structural element that transmits, through compression, the weight of the structure above to other structural elements below in, other word column is a compression member. For the purpose of wind or earthquake engineering, columns may be designed to resist lateral forces. Other compression members are often termed "columns" because of the similar stress conditions. Columns are frequently used to support beams or arches on which the upper parts of walls or ceilings rest. In architecture, "column" refers to such a structural element that also has certain proportional and decorative features. A column might also be a decorative element not needed for structural purposes; many columns are "engaged with", that is to say form part of a wall.

The word column is related to building construction.Column is make with the help of steel bars and cement concrete,and used to support the beam and support the weight of the particular building and also used to transfers the load of top floors directly to the earth surface.

Column load salb and sapport with beam

coloumn is a vertical member.which distribute the loads on super structure main parts like walls,beams,floors.its distribute total load below foundation of structure

Column is a vertical compression member which supports to beams & slab and transfer live & dead load of super structure to foundation.

A column is a vertical member made up of concrete and steel used to support the beam and to support the weight of the particular building.

column is a vertical structural member which transfers the load from beams to foundations

Column is vertical and a compression member in a st6ructure.
Main Functions:
1.it will separate two slabs( vertical separation)in a structure.
2.it will transfer load to footing.
3.it will avoid load bearing walls thus save space, labor,time ,money.

column is a technical word in civil engineering.It is a vertical member,it transfer the loads vertically from upwards to downwards independently to footings and those are transfer to the sub soil.

If you have the better answer, then send it to us. We will display your answer after the approval.
Rules to Post Answers in CoolInterview.com:-

There should not be any Spelling Mistakes.

There should not be any Gramatical Errors.

Answers must not contain any bad words.

Answers should not be the repeat of same answer, already approved.

Answer should be complete in itself.

Name :*
Email Id :*
Answer :*
Verification Code	Not readable? Load New Code
Enter the above shown code:*
	Inform me about updated answers to this question