Sponsored Links

Interview Questions
Recommended Books












INTERVIEW QUESTIONS CERTIFICATION EXAMS MICROSOFT CERTIFICATION EXAMS DETAILS
Question :

An Exchange Server 2007 clustered mailbox server is installed on a Single Copy Cluster (SCC).
You want to add another storage group and database to the clustered mailbox server.
You perform the following actions.
1. On the active and passive nodes of the cluster, mount a new database drive to
D:mountsSG5DB5_1 and mount a new log drive to D:mountsSG5Log5_1.
2. Create a new storage group named SG5, and point the log path to D:mountsSG5Log5_1.
3. Create a new database in SG5 named DB5_1 and point the database path to
D:mountsSG5DB5_1.
You need to complete the addition of the storage group and database to the clustered mailbox
server.
What should you do?
A. Change the mount location of the database and log drives to drive letter locations on the
active and passive nodes.
B. Remove the drives from the passive node until the active node is configured.
C. Add the drives as a cluster resource, and make the Microsoft Information Store dependent on
those resources.
D. Add the drives as a cluster resource, and make the storage group dependent on those
resources.


Category Microsoft Certification Exams Interview Questions
Rating (3.7) By 14 users
Added on 7/30/2015
Views 53
Rate it!

Highly Recommended, Hand Picked Microsoft Certification Exams Books



Question :

An Exchange Server 2007 clustered mailbox server is installed on a Single Copy Cluster (SCC).
You want to add another storage group and database to the clustered mailbox server.
You perform the following actions.
1. On the active and passive nodes of the cluster, mount a new database drive to
D:mountsSG5DB5_1 and mount a new log drive to D:mountsSG5Log5_1.
2. Create a new storage group named SG5, and point the log path to D:mountsSG5Log5_1.
3. Create a new database in SG5 named DB5_1 and point the database path to
D:mountsSG5DB5_1.
You need to complete the addition of the storage group and database to the clustered mailbox
server.
What should you do?
A. Change the mount location of the database and log drives to drive letter locations on the
active and passive nodes.
B. Remove the drives from the passive node until the active node is configured.
C. Add the drives as a cluster resource, and make the Microsoft Information Store dependent on
those resources.
D. Add the drives as a cluster resource, and make the storage group dependent on those
resources.


Answer:

Source: CoolInterview.com

D. Add the drives as a cluster resource, and make the storage group dependent on those
resources.

Source: CoolInterview.com




If you have the better answer, then send it to us. We will display your answer after the approval.
Rules to Post Answers in CoolInterview.com:-
  • There should not be any Spelling Mistakes.
  • There should not be any Gramatical Errors.
  • Answers must not contain any bad words.
  • Answers should not be the repeat of same answer, already approved.
  • Answer should be complete in itself.
Name :*
Email Id :*
Answer :*
Verification Code Code Image - Please contact webmaster if you have problems seeing this image code Not readable? Load New Code
Process Verification Enter the above shown code: *
Inform me about updated answers to this question

Related Questions
View Answer
Your environment contains t he following servers:
Mailbox server named ExchMb1
Client Access server named ExchCAS1
Standby Microsoft Windows Server 2003 computer named Server2
Two Hub Transport server s named ExchHub1 and ExchHub2 ExchHub1 fails.
You need to restore ExchHub1 to its pre- failure configuration
What should you do?
A. Rename Server2 to ExchHub1, and run the Setup /m:RecoverServer command on ExchHub1.
B. Rename Server2 to ExchHub1, and run the Setup /m:lnstall /role:HT command on ExchHub1.
C. On ExchHub2, run the Setup /m:RecoverServer command.
D. On ExchHub2, run the Setup /m:lnstall /role:HT command.
View Answer
Your Exchange Server 2007 environment has three Exchange servers that have the Mailbox
server role installed. The servers are configured to back up the existing Windows event logs and
mailbox databases. You add the Hub Transport server role to the Exchange servers. You want to
reconfigure the backups for the servers. Written company policy states that enough information
must be retained to perform a root cause analysis on lost or corrupted e-mail messages and to
recover as much data as possible in the event of a failure. You need to add backups for the Hub
Transport server role. What should you add to the current backups?
A. the TransportRolesLogs directory
B. the TransportRolesdataQueue directory
C. the Microsoft Information Store
D. the IIS metabase
View Answer
A users e-mail account is configured to use POP3. The users mailbox is accidentally purged from
the Exchange Server 2007 Mailbox server. You restore a backup copy of the database that
contained the mailbox to a recovery storage group on the same server. The user reports that he
can not access his mailbox. You need to ensure that the user can access his mailbox. Before you
reconnect the mailbox, what should you do?
A. Enable POP3 access on the mailbox.
B. Move the mailbox to a standard storage group.
C. Instruct the user to use IMAP to connect to the mailbox.
D. Instruct the user to use Outlook Web Access to connect to the mailbox.
View Answer
You install an Exchange Server 2007 Mailbox server. You want to create a full database backup
before you place users on the system. You take all databases offline so that they are consistent.
You initiate a backup by using the Microsoft Windows Backup utility. The backup immediately
fails, and you receive an error message. You need to complete a full backup of the databases.
What should you do?
A. Run the backup from the command line, with the /SNAP:ON switch.
B. Run the backup from the command line, with the /FU switch.
C. Shut down the information store, and restart the backup.
D. Mount all databases on the server, and restart the backup.
View Answer
An Exchange Server 2007 Hub Transport server named ExchHub1 fails. You build a new Hub
Transport server named ExchHub2 to replace ExchHub1.
After service is restored you want to recover all e-mail messages that remain in the mail.que
database on ExchHub1. You perform the following actions on ExchHub2.
Flush all messages from the existing queue on ExchHub2
Copy the mail.que database from the hard disk on ExchHub1 to C: ecoveryQueue on ExchHub2.
You need to complete the recovery of the mail.que database from ExchHub1.
Which two actions should you perform on ExchHub2? (Each correct answer presents part of the
solution. Choose two.)
A. Using the Database Recovery Management tool, perform a repair of the mail.que database in
C: ecoveryQueue.
B. Using the ISInteg utility, fix the mail.que database in C: ecoveryQueue.
C. Using the Eseutil utility, perform a recovery of the mail.que database in C: ecoveryQueue.
D. Using the Eseutil utility, perform a restore of the mail.que database in C: ecoveryQueue.
E. Using the Eseutil utility, perform a defragmentation of the mail.que database in
C: ecoveryQueue.
View Answer
You need to find out if users can log on to your Mailbox server directly by using Microsoft Office
Outlook. Which cmdlet should you run on the client network?
A. Test- ServiceHealth
B. Test- SystemHealth
C. Test- MAPIConnectivity
D. Test- OutlookWebServices
View Answer
The Mailbox server role and the Hub Transport server role reside on an Exchange Server 2007
computer named Exch1. You need to configure the server to retain the tracking logs for seven
days. What are two possible ways to achieve this goal? (Each correct answer presents a
complete solution. Choose two.)
A. Create a system policy to remove log files that are older than seven days.
B. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
C. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogEnabled:$true cmdlet.
D. Run the Set-TransportConfig -Identity Exch1 -MaxDumpsterTime 07.00:00:00 cmdlet.
E. Run the Set-MailboxServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
View Answer
Your Exchange Server 2007 environment contains a single Hub Transport server and a single
Mailbox server. E-mail delivery to large dynamic distribution group s is slow. All
MSExchangeADAccess Processes Performance Monitor counters on your Exchange servers
display normal results. You need to improve delivery time for messages that are sent to dynamic
distribution groups. What should you do?
A. Add more RAM to the existing Mailbox server.
B. Add more RAM to the existing domain controllers.
C. Deploy an additional global catalog server. Configure the existing Hub Transport server to use
the new global catalog server.
D. Deploy a second Hub Transport server. Configure the dynamic distribution groups to use the
new Hub Transport server as their expansion server.
View Answer
Users report that they are unable to access their mailboxes on an Exchange Server 2007
computer named Exch1. You verify that connectivity to the server is functioning and that server
hardware is functioning normally. Access to global catalogs is also functioning normally. You
need to report on the status of all required Exchange-specific and Exchange-dependent services.
What should you do?
A. From the Exchange Troubleshooting Assistant, run the Database Troubleshooter.
B. Run the Test-ServiceHealth -Server Exch1 cmdlet.
C. Run the Test-SystemHealth -Server Exch1 cmdlet.
D. Run the Get-ExchangeServer-ldentityExch1 cmdlet.
View Answer
Your native Exchange Server 2007 organization has a single Edge Transport server named Exch
Edge1. Exch Edge1 has an Edge Subscription established with a Hub Transport server named
Exch Hub1. The network connection from Exch Edge1 to the Internet is interrupted for an
extended period of time. After the network connection is restored, no messages are being
delivered. You need to restore message flow immediately. What should you do?
A. On ExchHub1, run the Resume-Queue cmdlet.
B. On ExchHub1, run the Retry-Queue cmdlet.
C. On ExchEdge1, run the Resume-Queue cmdlet.
D. On ExchEdge1, run the Retry-Queue cmdlet.
View Answer
You need to configure the minimum permissions necessary for a user to be able to configure
mailbox databases on an Exchange Server 2007 computer. What should you do?
A. Delegate Exchange Administrator privileges to the user account at the organization level.
B. Add the user account to the Exchange Server Administrators role.
C. Add the user account to the Exchange Recipient Administrators role.
D. Add the user account to the Exchange Organization Administrators role.
View Answer
You need to configure the minimum permissions necessary for a new administrator so that she
can prepare Active Directory for Exchange Server 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Add the new administrator as an Exchange Full Administrator at the organization level.
B. Add the new administrators user account to the Exchange Enterprise Servers group.
C. Add the new administrators user account to the Domain Admins group.
D. Add the new administrators user account to the Enterprise Admins group.
E. Add the new administrators user account to the Schema Admins group.
View Answer
A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007
Edge Transport server named Exch1. You want to apply this policy to a new Edge Transport
server named Exch2. You install SCW on Exch2. You copy the existing SCW policy to Exch2 as
C:ExchangeSCWPolicy.xml. You need to apply the custom policy to Exch2. What should you
do?
A. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:?Ex2007KB? /kbfile:?%programfiles%MicrosoftExchange
ServerscriptsExchange2007Edge.xml? command.
B. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:?Ex2007EdgeKB? /kbfile:?%programfiles%MicrosoftExchange
ServerscriptsExchange2007.xml? command.
C. First, run the Scwcmd register /kbname:? Ex2007KB ? / kbfile:? %programfiles
%MicrosoftExchange ServerscriptsExchange2007 Edge .xml? command. Then, use SCW to
apply the C:ExchangeSCWPolicy.xml policy.
D. First, run the Scwcmd register /kbname:?Ex2007EdgeKB? / kbfile:? %programfiles
%MicrosoftExchange ServerscriptsExchange2007 .xml? command. Then, use SCW to apply
the C:ExchangeSCWPolicy.xml policy.
View Answer
You install an Exchange Server 2007 Edge Transport server role and Hub Transport server role.
The server that has the Hub Transport server role is located in an Active Directory site named
Chicago. You need to synchronize your companys Active Directory information to the server that
has the Edge Transport server role. Which two actions should you perform? (Each correct answer
presents part of the solution. Choose two.)
A. Run the New- EdgeSubscription - FileName ?c:EdgeserverSubscription.xml ? cmdlet on the
server that has the Edge Transport server role.
B. Run the New-EdgeSubscription -FileName ?c:EdgeServerSubscription.xml? ?site ?Chicago?
cmdlet on the server that has the Hub Transport server role.
C. Run the ADAMSync command on the server that has the Edge Transport server role.
D. Run the ExportEdgeConfig -CloneConfigData ?C:CloneConfigData.xml? command on the
server that has the Edge Transport server role.
E. Run the ImportEdgeConfig - CloneConfigData ? C:CloneConfigData.xml ? command on the
View Answer
Your company s Active Directory forest consists of a single site that has a root domain and one
child domain.
You need to prepare Active Directory and the domains prior to installing the first Exchange Server
2007 computer. Which two commands should you run? (Each correct answer presents part of the
solution. Choose two.)
A. Setup /ForestPrep
B. Setup /PrepareAD
C. Setup /DomainPrep
D. Setup /PrepareAllDomains
View Answer
You plan to install the Hub Transport server role on an Exchange Server 2007 Mailbox server
named Exch1. The installation must occur during nonbusiness hours. You verify that Exchange
Server 2007 is installed on Exch1 at C:Program FilesMicrosoftExchange Server. A copy of the
Exchange installation files is located in the C:lnstallFiles custom directory. You create a new file
named install.bat in the root directory of drive C. You need to schedule the installation of the Hub
Transport server role on Exch1. What should you do?
A. In the install.bat file, type the following command: ?C:lnstallFilesSetup? /mode Install /roles
HubTransport Create a scheduled task to run the executable.
B. In the install.bat file, type the following command: ?C:Program FilesMicrosoftExchange
ServerSetup? /mode Install/roles HubTransport Create a scheduled task to run the
executable.
C. In the install.bat file, type the following command: ?C:lnstallFilesSetup? /mode RecoverServer
/roles HubTransport Create a scheduled task to run the executable.
D. In the install .bat file, type the following command: ?C :Program FilesMicrosoftExchange
ServerSetup? /mode RecoverServer /roles HubTransport Create a scheduled task to run the
executable.
View Answer
You are creating a cluster continuous replication (CCR) cluster. You create a failover cluster and
you install the Mailbox server role named ExchMB1 on the active node. You need to install the
Mailbox server role on the passive node. What are two possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose two.)
A. Run the Enable-StorageGroupCopy -Identity ExchMB1SG1 command.
B. Run the Setup /roles:Mailbox command.
C. Run the Setup /newcms /CMSname:ExchMB1 command.
D. Select the Passive Clustered Mailbox Role check box in the Exchange Server 2007 Setup
View Answer
Your companys e-mail domain is contoso.com. Three Edge Transport servers in your Exchange
Server 2007 organization will accept Internet mail. The servers are named Exch1, Exch2, and
Exch3. You need to load balance Exch2 and Exch3 and you need to configure Exch1 as a
backup server. Which three MX records should you specify? (Each correct answer presents part
of the solution. Choose three.)
A. contoso.com MX preference = 10, mail exchanger = Exch1 .contoso.com
B. contoso.com MX preference = 10, mail exchanger = Exch3.contoso.com
C. contoso.com MX preference = 10, mail exchanger = Exch2.contoso.com
D. contoso.com MX preference = 20, mail exchanger = Exch2.contoso.com
E. contoso.com MX preference = 20, mail exchanger = Exch1 .contoso.com
F. contoso.com MX preference = 20, mail exchanger = Exch3.contoso.com
View Answer
You are preparing to transition from Exchange 2000 Server to Exchange Server 2007. The
environment consists of a single Windows 2000 native mode Active Directory domain and an
Exchange 2000 organization running in mixed mode. The schema master, domain naming
master, and PDC emulator all run on a Microsoft Windows 2000 Server domain controller. You
need to prepare the environment for Exchange 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Move the PDC emulator role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
B. Move the schema master role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
C. Move the domain naming master role to a domain controller that runs Windows Server 2003
with Service Pack 1.
D. Convert the Exchange 2000 organization to native mode.
View Answer
You need to identify the Exchange Server 2007 server role that must be installed on a stand-
alone server. Which server role should you identity?
A. ClientAccess
B. Edge Transport
C. Hub Transport
D. Mailbox
View Answer

Please Note: We keep on updating better answers to this site. In case you are looking for Jobs, Pls Click Here Vyoms.com - Best Freshers & Experienced Jobs Website.

View ALL Microsoft Certification Exams Interview Questions & Answers



User Options
India News Network

Latest 20 Questions
What are the Hadoop related Projects at Apache?
What are the modules included in Apache Hadoop Project?
What is Apache Hadoop?
What is a Private Cloud? Do we need one to handle Big Data?
How Can We Cope with the Impact of Big Data?
What skills do Big Data analysts need to have?
What does a Big Data analyst do?
What are some real-world examples of Big Data and how it is used?
What is Big Data Analytics?
Why Big Data is becoming so important?
What is the impact of Big Data on Sports Industry?
What is the impact of Big Data on Real estate Industry?
What is the impact of Big Data on Retail Banking Industry?
What is the impact of Big Data on Retail Industry?
What is the impact of Big Data on Technology Industry?
What is the impact of Big Data on Information Technology Industry?
What is the impact of Big Data on Internet of Things (IoT) Industry?
What is the impact of Big Data on Media Industry?
What is the impact of Big Data on Education Industry?
What is the impact of Big Data on Healthcare Industry?



Fresher Jobs | Experienced Jobs | Government Jobs | Walkin Jobs | Company Profiles | Interview Questions | Placement Papers | Companies In India | Consultants In India | Colleges In India | Exams In India | Latest Results | Notifications In India | Call Centers In India | Training Institutes In India | Job Communities In India | Courses In India | Jobs by Keyskills | Jobs by Functional Areas

Testing Articles | Testing Books | Testing Certifications | Testing FAQs | Testing Downloads | Testing Interview Questions | Testing Jobs | Testing Training Institutes

Gate Articles | Gate Books | Gate Colleges | Gate Downloads | Gate Faqs | Gate Jobs | Gate News | Gate Sample Papers | Gate Training Institutes

MBA Articles | MBA Books | MBA Case Studies | MBA Business Schools | MBA Current Affairs | MBA Downloads | MBA Events | MBA Notifications | MBA FAQs | MBA Jobs
MBA Job Consultants | MBA News | MBA Results | MBA Courses | MBA Sample Papers | MBA Interview Questions | MBA Training Institutes

GRE Articles | GRE Books | GRE Colleges | GRE Downloads | GRE Events | GRE FAQs | GRE News | GRE Training Institutes | GRE Sample Papers

IAS Articles | IAS Books | IAS Current Affairs | IAS Downloads | IAS Events | IAS FAQs | IAS News | IAS Notifications | IAS UPSC Jobs | IAS Previous Question Papers
IAS Results | IAS Sample Papers | IAS Interview Questions | IAS Training Institutes | IAS Toppers Interview

SAP Articles | SAP Books | SAP Certifications | SAP Companies | SAP Study Materials | SAP Events | SAP FAQs | SAP Jobs | SAP Job Consultants
SAP Links | SAP News | SAP Sample Papers | SAP Interview Questions | SAP Training Institutes |




Copyright ©2003-2016 CoolInterview.com, All Rights Reserved.
Privacy Policy | Terms and Conditions



Cache = 0.007812 Seconds